TRADITIONAL SHAOLIN SPITFIRE (Wu Tang Forever)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Nice Flathead motor for the bee.
Smart thinkin!
 
The 'W'



20240718_123124.jpg


20240718_123216.jpg
 
Was planning on using earth magnets to attach the 'W' to the top plate...but the stainless steel isn't magnetic 😔

20240718_121216.jpg


I considered mounting these shelf clips to hold it, but the positioning would be off.

20240718_123953.jpg


20240718_124605.jpg


Experimented with a suction cup, but not sure how long it would hold on a ride.

20240718_124526.jpg


So I put rubber washers top and bottom and ran the bolt through. Leaving this as inspiration, for now, but will fabricate a low profile hanger, in similar fashion to a plate hanger without springs.

20240718_134031.jpg


It can be used as a bottle opener, so I want to be able to detach and re-attach it with some ease.
 
Sticking with the diamond grips. The color and pattern are too perfect.

20240718_123617.jpg


@MattiThundrrr Here's your duel 😉

20240718_123634.jpg


Going to tighten the screens all the way down. The thread pitch is way different, though the diameter matches, so I'll have to crank 'em down.

20240718_123624.jpg
 
Was planning on using earth magnets to attach the 'W' to the top plate...but the stainless steel isn't magnetic 😔

View attachment 273532

I considered mounting these shelf clips to hold it, but the positioning would be off.

View attachment 273533

View attachment 273536

Experimented with a suction cup, but not sure how long it would hold on a ride.

View attachment 273534

So I put rubber washers top and bottom and ran the bolt through. Leaving this as inspiration, for now, but will fabricate a low profile hanger, in similar fashion to a plate hanger without springs.

View attachment 273535

It can be used as a bottle opener, so I want to be able to detach and re-attach it with some ease.

Get some peel and stick magnetic tape. Or some velcro.
 
Now that I see both mic'ed up steering arms together, I like this configuration better. Love the grips too.
 
As previously mentioned, the thread pitch on the mic screens are different than the pipe reducers. I tried forcing it through, and I got about 2 threads down on one side, but can barely get a single to catch on the other side. May need to file down a bit or try and cut a new channel with a dremel, as I don't have a tap that size/tpi.

Screenshot_20240718-093333_Instagram.jpg
 
Was planning on using earth magnets to attach the 'W' to the top plate...but the stainless steel isn't magnetic 😔

View attachment 273532

I considered mounting these shelf clips to hold it, but the positioning would be off.

View attachment 273533

View attachment 273536

Experimented with a suction cup, but not sure how long it would hold on a ride.

View attachment 273534

So I put rubber washers top and bottom and ran the bolt through. Leaving this as inspiration, for now, but will fabricate a low profile hanger, in similar fashion to a plate hanger without springs.

View attachment 273535

It can be used as a bottle opener, so I want to be able to detach and re-attach it with some ease.
Foam double stick tape.

Scotch-Double-Sided-Foam-Mounting-Tape-1-2-x-150-1-Roll_23db998c-a8a3-4cc0-80a3-52331b350ce5.97bacea53384fe40f85c05e146c75375.jpeg
 
As previously mentioned, the thread pitch on the mic screens are different than the pipe reducers. I tried forcing it through, and I got about 2 threads down on one side, but can barely get a single to catch on the other side. May need to file down a bit or try and cut a new channel with a dremel, as I don't have a tap that size/tpi.

View attachment 273714
I wonder if you could grind one side of your bolt a bit to create a makeshift tap?
 
Was planning on using earth magnets to attach the 'W' to the top plate...but the stainless steel isn't magnetic 😔

View attachment 273532

I considered mounting these shelf clips to hold it, but the positioning would be off.

View attachment 273533

View attachment 273536

Experimented with a suction cup, but not sure how long it would hold on a ride.

View attachment 273534

So I put rubber washers top and bottom and ran the bolt through. Leaving this as inspiration, for now, but will fabricate a low profile hanger, in similar fashion to a plate hanger without springs.

View attachment 273535

It can be used as a bottle opener, so I want to be able to detach and re-attach it with some ease.


What about something along the lines of those adjustable bike cell phone holders?

1721435372647.png
 

Latest posts

Back
Top